Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
This Mountain Stem from Specialized is CNC-machined, sleek and lightweight. - 3D forged and CNC-machined 6061 aluminume - 6-degree rise - Oversized 31.8mm handlebar interface - Compatible with composite handlebars
Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
MSW 17° stems raise the bar--literally--for what riders can expect from an inexpensive stem. Available in lengths from 60-120mm for custom-fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
$29.99 - $35.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
$30.00 - $34.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build. - Height above insert: 130mm - Use shims for 25.4 handlebars (sold separately)
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Syntace's F44 is a direct mount stem intended for rock-solid control on dual-crown forks. Sabertooth bar clamp design ensures no bolts or clamping surfaces protrude, and wide, cantilever-style mount arms provide a low profile. - Weight: 91g
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
From road to mountain, the F109 stem offers a variety of lengths in a +/-6 degree angle and thoughtfully engineered features. - Oversized stem tube diameter for increased stiffness - Titanium bolts - 200 degree clamp face increases handlebar strength and fatigue life
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos
Page 1 of 2 Next page